Spring Tensile and Compressive Performance Testing Machine

• Customization: Available
• After-sales Service: 18106083608
• Warranty: 220V
• Model NO.: STS-10TL
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: <900kg
• Type: Strength Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Mechanical Load
• Loading Method: Static Load
• Display: Digital
• Control: Computer Control
• Weight: 100-500Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Transport Package: Customized Packaging
• Specification: 780× 550× 1850mm
• Trademark: east
• Origin: China
• Production Capacity: 100

Product Description

Product Description

Product introduction

This testing machine is refined based on JB/T 8064.1-1996 "Design and Calculation of Gas Springs". It is mainly used for testing

Test the strength of the gas spring and the elastic element, that is, the height (deformation) of the test spring under a certain test force or in one

The test force of the spring is measured at a fixed height (deformation).

Technical features:

1. With limit function, the limit position protection switch is limited at the limit position of compression to prevent misoperation.

2. Exclusive maximum force setting function, effectively prevent the gas spring from causing damage to the equipment in unexpected situations.

3. Exclusive displacement protection setting function

4. Exclusive deformation protection setting function

5. There is an emergency stop function, if there is an accident in the test, it can be stopped urgently.

Test Features:

The working process of this testing machine is automatic test mode, and the test parameters of the spring are combined with the control mode

The intelligent control system determines the control mode of the test process according to the category of parameters to ensure the adoption of test parameters High efficiency of the set, display and test process.

1. Enter the height of the spring and measure the corresponding test force. (The test parameters of the spring are stored in the file, and can be called during the next test, the same below)

2. Enter the test force of the spring, and measure the corresponding deformation or test height.

3. The setting of the above parameters, if it is a batch test, then only need to enter once, the operator only takes the spring and presses the test key, and the rest is all completed automatically, with high efficiency and convenient operation.

4. The displacement resolution is 0.001mm, which is more suitable for testing all kinds of springs.

5. The test speed can be determined according to the speed requirements of the gas spring.

6. The height-force curve can be drawn simultaneously at the same time as the test.

Specification

Equipment model	STS-10TL	STS-50TL	STS-100TL
Maximum testing machine (N)	10000N	50000N	100000N
Measuring range (N)	400N-10000N	2000N-50000N	4000N-100000N
Minimum resolution of experimental force	0.1N
Relative error of force indication	≤±1.0%
Relative error of indication repeatability	≤1.0%
Relative error of zero point of experimental force	≤±0.1%F*N
Testing speed	0.01~500mm/min
Test speed error	≤±(50+0.15l) ^um Note:1 is the distance between the pressure plates measured at any position (mm)
pressure plate (mm)	∅200mm
Parallelism error of upper and lower platens(mm)	≤0.1mm
Upper and lower platen offset errors	≤0.1mm
Power supply voltage AC(V)	220V±10% 50HZ
Dimensions: L× W× H	780×550×1850
WEIGHT (KG)	About 350 (excluding computer)
Enforce the standard	This testing machine is based on JB/T 8064.1-1996 "Design and Calculation of Gas Springs".

Company Profile

Product Application

Applicable to electronic products, electronic devices, LED, photovoltaic new energy, mobile phones, communications, instruments, vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace, etc. 

Company Profile

Lugong Instrument is an enterprise specializing in the design, research and development, production, sales and after-sales service of testing equipment. At present, the company is mainly engaged in environmental simulation reliability testing equipment, material mechanics testing equipment, powder testing equipment, plastic and rubber testing equipment, carton testing equipment, metal material testing equipment, combustion testing equipment and other products. 

Lugong Instrument adheres to the spirit of "craftsman spirit, excellence" to provide customers with accurate and efficient testing solutions and high-quality products. At present, the company has passed the ISO9001 certification, and the instruments and equipment are fully in line with ASTM, JIS, ISO, IEC, UL, CE.... and other international standards. 

Lugong Instrument has a team of professional technical engineers and sales engineers, relying on strong factory resources, to expand mature network sales channels and offline designated service offices [Hefei, Jinan, Ningbo, Kunshan, Dongguan, Xiamen]. At present, our customers are all over the provincial administrative regions of the country, and some products have been sold to many countries in Asia and the Americas.