Advanced Salt Spray Test Chamber for Corrosion Resistance Testing

• Customization: Available
• Power Supply: 220V
• Certification: CE, TUV, ISO
• Model NO.: ST-60C
• Warranty: 1 Year
• Temperature Range: Rt+10°c~55°c
• Humidity Range: ≥93%R.H
• Temperature Uniformity: ±2°c
• Temperature Fluctuation: ±0.5°c
• Fog Deposition: 1~2m/80cm2
• Spray Mode: Continuous/Periodic Optional
• Transport Package: Wooden Frame Packaging
• Specification: 1060× 650× 990mm
• Trademark: east
• Origin: China
• Production Capacity: 100

Product Description

Product Description

Introduction to Salt Spray Test Chamber

The salt spray test is widely used in industries such as automotive, aerospace, and marine to evaluate the durability and performance of materials and coatings. It helps manufacturers to identify potential corrosion problems early on in the product development stage, which can save them time and money in the long run. Additionally, the salt spray test can be used to compare the corrosion resistance of different materials and coatings, aiding in the selection of the most suitable materials for a specific application.

Applicable international standards: RELATEUSTANDARDSCNS3627,3885,4159,7669,8866;JISD-0201,H-8502,H-8610,K-5400,Z-2371,ISO3768,3769,3770;ASTMB-117,ASTMB-268GB-T2423,GJB180A

Working principle of salt Spray Test Chamber

The Salt Spray Test Chamber creates an environment where a saltwater mist, usually composed of a 5% sodium chloride (NaCl) solution, is continuously sprayed onto the test samples. The chamber's temperature and humidity are controlled to maintain specific testing conditions, ensuring reproducibility and consistency.

The test samples are carefully prepared and placed inside the chamber, and the duration of the test can vary depending on the intended application and industry standards. The samples are then exposed to the corrosive salt spray, and the chamber's environment is monitored throughout the testing period.

During and after the test, the samples' appearance and performance are observed and analyzed to evaluate any signs of corrosion, such as rust, blistering, or color changes. Test results allow researchers and manufacturers to determine the materials' corrosion resistance, assess the effectiveness of protective coatings, and make informed decisions about product quality and design improvements.

Model	ST-60C	ST-90C	ST-120C	ST-160C	ST-200C
Inner dimension WxHxD(mm)	600x400x450	900x500x600	1200x500x1000	1600x500x1000	2000x600x1500
Exterior dimension WxHxD(mm)	1060x990x650	1410x1280x880	1900x1400x1300	2300x1400x1300	2750x1450x1850
Installed power	1.5(kw)	2.5(kw)	3.5(kw)	4.5(kw)	4.5(kw)
Brine tank capacity	15L	25L	40L	40L	40L
Number of collectors	1	2	2	2	2
Number of spray towers	1 group	1 group	2 groups	2 groups	2 groups
Temperature range	RT+10℃~60℃
Humidity range	≥85% R.H or more (dry and wet bulb comparison table calculation)
Temp.uniformity	≤±1℃
Temp.fluctuation	≤±0.5℃
Pressure barrel temperature	RT+10℃~80℃
Salt Mist Settling Volume	1~2ml/h.80cm² (collected for at least 16 hours, average value taken)
Spray pressure	1.00±0.01kgf/cm²
PH value (PH)	PH=6.5~7.2(NSS)/PH=3.0~3.3(ACSS,CASS)
Test time	1~999(S,M,H)(Adjustable)
Saline solution concentration	Sodium chloride solution concentration 5% (neutral salt spray)
	Sodium chloride solution 5%+ glacial acetic acid (acetate spray)
	Sodium chloride solution concentration 5% + glacial acetic acid + 0.26g CuCl2/L (copper accelerated salt spray)
Spray way	Continuous spraying + intermittent spraying

Heating methods	Direct steam heating method
Controller	PID control, error ± 0.1 °
Standard configuration	1 round bar, 1 V-shaped sample holder, 2 nozzles, 2 sets of funnels and 2 sets of measuring cylinders
Safety protection device	Over temperature protection
	Lack of water protection
	Over current protection
Power supply	AC 220V/50HZ

Product Application

Applicable to electronic products, electronic devices, LED, photovoltaic new energy, mobile phones, communications, instruments, vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace, etc. 

Company Profile

Lugong Instrument is an enterprise specializing in the design, research and development, production, sales and after-sales service of testing equipment. At present, the company is mainly engaged in environmental simulation reliability testing equipment, material mechanics testing equipment, powder testing equipment, plastic and rubber testing equipment, carton testing equipment, metal material testing equipment, combustion testing equipment and other products. 

Lugong Instrument adheres to the spirit of "craftsman spirit, excellence" to provide customers with accurate and efficient testing solutions and high-quality products. At present, the company has passed the ISO9001 certification, and the instruments and equipment are fully in line with ASTM, JIS, ISO, IEC, UL, CE.... and other international standards. 

Lugong Instrument has a team of professional technical engineers and sales engineers, relying on strong factory resources, to expand mature network sales channels and offline designated service offices [Hefei, Jinan, Ningbo, Kunshan, Dongguan, Xiamen]. At present, our customers are all over the provincial administrative regions of the country, and some products have been sold to many countries in Asia and the Americas.